Introduction to the Murphy Bed Lock Mechanism
Discover peace of mind with our innovative Murphy Bed Cabinet Lock Mechanism by Easy DIY Murphy Bed USA. Expertly engineered for a range of DIY Murphy bed setups, this secure lock seamlessly integrates with our exclusive designs—and many other Murphy bed configurations. Its reliable design prevents accidental openings, ensuring that your bed stays safely closed, making it the perfect choice for families seeking added security at home.
Video Length 5:42 min.
Components of the Lock Mechanism
Experience effortless DIY installation with our Cabinet Cam Lock Installation Kit for the Murphy Bed hardware. Each kit features a premium lock mechanism, two robust three-quarter-inch wood screws, and a sleek black plastic receiver cap—everything you need for a secure setup. Plus, our easy-to-follow installation guide ensures even beginners can achieve professional results.
Installation Guidelines
The cabinet installation video begins with selecting the appropriate location for the lock. It is recommended that the lock be installed 12 to 16 inches from the top of the cabinet, though this can be adjusted based on height requirements. The horizontal placement is crucial, as it must intersect with the bed frame inside the cabinet. A distance of 2 to 5 inches from the cabinet’s front is ideal, with adjustments possible for taller side rails.
Steps for Installation
- **Marking the Position**: Using painter’s tape, mark the lock’s center location on the bed cabinet to ensure accurate placement.
- **Drilling the Pilot Hole**: With the bed closed, drill a pilot hole through the cabinet into the bed frame, marking the center location as shown in the cabinet lock installation video.
- **Drilling the Lock Hole**: Use a three-quarter-inch Forstner drill bit to create a hole in the cabinet based on the pilot hole, avoiding drilling into the bed frame.
- **Inserting the Lock**: Place the lock’s round body into the drilled hole, adjust it as necessary, and secure it with the provided screws.
- **Preparing the Receiver Cap**: Open the bed to access the pilot hole drilled in the side rail and create a half-inch hole for the receiver cap, which should be hammered into place if necessary.
- **Finalizing Installation**: With the Murphy bed cabinet lock mechanism in place, test it by pulling the knob to unlock and pushing it in to lock the bed frame securely.
Usage Instructions
The cabinet lock installation video will also show you to operate the lock; simply pull the knob to unlock the bed before opening it. To lock the bed frame, close it and push the knob all the way in. The mechanism is now fully functional, enhancing the safety and security of your Murphy bed setup.